Cryovela 360° Cryolipolysis Body Contouring System

Overall Introduction

Help clients address stubborn, localized fat while giving your studio more than one approach to body contouring. Cryovela brings 360° cryolipolysis, 40 kHz ultrasonic cavitation, 5 MHz radiofrequency (RF), and lipo laser into a single floor-standing system.

Its defining feature is surround-contact cooling. Vacuum draws suitable tissue into a cryolipolysis cup, where cooling surfaces extend around the captured fold. Five cryo applicators—two large, two small, and one mini—help providers select a cup for different anatomical areas rather than using one shape for every client.

Dedicated body RF, face RF, cavitation, and lipo laser functions broaden the menu beyond fat-freezing appointments. A 10.4-inch touchscreen, adjustable operating settings, and mobile console make Cryovela a practical fit for aesthetic studios and med spas building area-specific services.

How Cryovela’s Four Body-Contouring Technologies Work

360° Cryolipolysis | Controlled Cooling for Pinchable Fat

Cryolipolysis applies controlled cold to subcutaneous fat. Fat cells can be more vulnerable to cold injury than surrounding tissues; following an appropriately delivered treatment, affected cells trigger an inflammatory response and are gradually cleared by the body.

Cryovela’s vacuum applicator lifts a suitable tissue fold into a cup lined with surrounding cooling contact surfaces. The 360° design is intended to expose more of that captured tissue to cooling than a limited-contact surface. It does not mean that every part of the tissue reaches the same temperature, and actual treatment depends on cup fit, suction, cooling performance, and the approved protocol.

40 kHz Ultrasonic Cavitation | Acoustic Energy for Contour Services

The cavitation handpiece delivers low-frequency ultrasound. Oscillating acoustic pressure produces mechanical effects in tissue and, at appropriate intensities, can produce cavitation activity. This is a different mechanism from cold-induced fat-cell injury.

A 40 kHz setting identifies the operating frequency, not the delivered acoustic intensity or a guaranteed fat-reduction result. The handpiece gives providers an additional body-contouring modality for suitable areas such as the waist, abdomen, and thighs, subject to client assessment and the device protocol.

5 MHz Face & Body RF | Heat-Based Skin-Firming Services

Radiofrequency energy passes through tissue and generates heat through electrical resistance. Controlled heating may influence collagen structure and remodeling, which is why RF is used in treatments addressing mild skin laxity and the appearance of fine lines.

Cryovela includes separate face and body RF handpieces. The facial handpiece supports work on smaller treatment areas; the body handpiece is intended for larger areas such as the abdomen, upper arms, and thighs. RF is a skin-firming service, not a substitute for cryolipolysis when the main concern is a localized fat bulge.

Lipo Laser | A Separate Light-Based Contouring Option

The lipo laser pads provide a light-based modality distinct from cooling, ultrasound, and RF heating. Low-level laser devices have been studied for circumference-focused body contouring, but effects depend on wavelength, delivered dose, treatment schedule, and device design.

The supplied specification lists 100 mW per laser unit but does not identify a wavelength. For this reason, a specific fat-cell mechanism or expected circumference reduction cannot be attributed to Cryovela without further manufacturer evidence. The pads can be positioned as a separate modality within a qualified treatment menu.

Designed Around Better Applicator Fit and Treatment Control

Five Cryo Applicators with Interchangeable Cups

Two large, two small, and one mini cryo applicator accommodate different amounts and shapes of pinchable tissue. The supplied configuration lists four interchangeable cup options for each large applicator and three for each small applicator. Choosing an appropriate cup helps achieve contact and positioning without forcing a larger applicator onto a smaller area.

360° Cooling with Adjustable Suction

Surrounding cooling surfaces help expose the captured fold to cold from multiple sides. The specified -10°C to +45°C temperature range and 0–80 kPa negative-pressure range give trained operators control over the equipment settings used in the prescribed protocol. These are device settings, not proof of a particular tissue temperature or result.

Four Cycle Modes and a 10.4-Inch Touchscreen

Four listed cryolipolysis cycle modes and the central touchscreen support selection and adjustment of operating settings. The photographed interface displays separate cryo channels with treatment time, temperature, and suction-related fields, helping staff review the active setup without moving between separate control panels.

Soft Silicone Contact and Accessory Alerts

Soft silicone edges help the cryo cups sit against body contours. Intelligent socket recognition is specified to alert operators to an incorrect accessory connection during setup. Both features support a more consistent workflow, but neither removes the need for proper protective membranes, screening, monitoring, or trained operation.

Turn One Platform into Clearly Defined Spa Services

Build Your Menu Around the Concern, Not the Handpiece

A localized, pinchable bulge calls for a different consultation than mild skin laxity. Position cryolipolysis as an assessed fat-reduction service, cavitation as an ultrasound-based contouring option, RF as a face or body firming service, and lipo laser as a separate light-based offering. This gives clients a clearer reason to choose one appointment over another.

Create Area-Specific Consultations and Packages

Large and small cryo cups make it possible to evaluate different suitable treatment areas, from the abdomen and flanks to selected arm or thigh zones. Providers can build area-specific appointment categories and follow-up assessments without promising a fixed number of sessions or a universal result.

Offer Complementary Services Without Blending Their Claims

A studio can offer RF skin-firming consultations alongside fat-freezing or ultrasound services when appropriate. Keep the service objectives distinct: cooling targets suitable fat deposits; RF focuses on skin appearance. Any combined or sequential treatment plan must follow validated protocols and client screening rather than an assumed one-size-fits-all package.

Keep Multiple Modalities in One Treatment Room

The wheeled console stores several applicators and places the operating interface on one adjustable screen. For businesses with limited floor space, this reduces the need for separate consoles for the four listed modalities while allowing staff to prepare the handpiece required for each booked service.

Specifications

• Model: Cryovela

• Voltage: 110V / 220V; 50Hz / 60Hz

• Technology: 360° Cryolipolysis, 40 kHz Ultrasonic Cavitation, RF, Lipo Laser

• Handpieces: 9 (supplier-listed configuration)

• Cryolipolysis Applicators: 5 (2 large, 2 small, 1 mini)

• Cryolipolysis Cycle Modes: 4

• Cooling / Heating Range: -10°C to +45°C (14°F to 113°F)

• Negative Pressure: 0–80 kPa

• Cavitation Frequency: 40 kHz

• RF Frequency: 5 MHz

• Laser Power: 100 mW/pc

• Rated Power: 1,500 W

• Touchscreen: 10.4" (26.4 cm)

• Large Applicator Cup Options: 4 per applicator

• Small Applicator Cup Options: 3 per applicator

• Mini Applicator Size: 3.1" × 1.6" (80 × 40 mm)

• Applicator Contact Material: Soft silicone

• Accessory Recognition: Intelligent connection alert

• Ambient Temperature: 41°F–104°F (5°C–40°C)

• Relative Humidity: ≤ 80%

• Unit Dimensions: 45.3" × 25.6" × 22.8" (115 × 65 × 58 cm)

• Net Weight: 123.5 lbs (56 kg)

• Package Dimensions (Machine): 45.3" × 25.6" × 22.8" (115 × 65 × 58 cm)

• Package Dimensions (Accessories): 31.1" × 17.7" × 10.6" (79 × 45 × 27 cm)

• Gross Weight: 163.1 lbs (74 kg)

• Warranty: 36 months

• Logo customization: Supported